Final Step Restoration Protection - Matte Finish

• Final step after sealer – Lantania recommends applying Hidrosebin after Twins.TW on rough marble, stone and granite when a brighter, easier-to-maintain finish is desired - Twins.TW for deep oil/water repellent protection, Hidrosebin for the final protection.
  
• Water-based finishing sealer for stone – Hidrosebin is an aqueous emulsion specifically designed as a finishing treatment for Pietra Serena and medium-absorbent stones, as well as brushed/textured marble, granite and other stone surfaces.
  
• Matte Finish – Gives treated surfaces a pleasant matte finish, enhancing tone without creating a heavy plastic film, ideal where you want a more refined, easy-to-clean surface.
  
• Oleo-hydro repellent & anti-soiling – Protects stone from grease stains, acidic washes and diluted alkaline solutions, and is marketed as an anti-dirt finish that makes everyday maintenance faster.
  
• Vertical cladding & hard-to-clean areas – Hidrosebin is especially recommended for vertical cladded stones that are difficult to maintain, giving them a light sheen and making dirt release more easily.

Always follow the label on your specific bottle; the steps below summarize the manufacturer guidance.

1. Surface prep

• Ensure the surface is well-cleaned and completely dry.
• If using it as a system, apply Twins.TW sealer first, allow it to dry for a couple of hours, then proceed with Hidrosebin.

2. First coat

• Apply Hidrosebin using a cloth, brush or mop, in a thin, uniform layer.
• Do not flood the surface or leave excess product standing.

3. Second coat

• After about 2 hours, apply a second coat on very absorbent or textured surfaces.
• Remove any excess with a clean cloth or absorbent paper to avoid streaks or build-up.

4. Drying & first use

• Allow the surface to dry for 12–24 hours (full dry at ~24 hours).

5. Maintenance

• Clean treated floors with a neutral detergent such as Sanimar.

• Medium-absorbent sandstone/limestone floors
  
• Brushed or textured marble and granite floors and stairs
  
• Vertical stone cladding that tends to trap dust and smudges
  
• Interior residential or commercial spaces.